Attention to the installation of drip irrigation belt

Attention to the installation of drip irrigation belt

1. According to the requirements of the design documents, the model, specifications, quantity and quality of the equipment are checked and checked, and the unqualified products are strictly prohibited. The equipment to be installed should be kept clean, and the plastic pipe should not be thrown, dragged and exposed.

2, install water meter, valve and filter according to design requirements and flow direction mark. The strainer and the branch pipe are connected through a straight thread with a thread.

3. Installation of threaded pipe fittings

Precautions for installation of drip irrigation system

Precautions for installation of drip irrigation system

When the tape is wrapped, the lock should be tightened.

4, before the bypass installation, first use a special puncher to punch holes in the branch pipe. When punching, the punch can not be tilted and the depth of the bit entry must not exceed the 1/2 pipe diameter; then the bypass is pressed into the branch pipe.

5. The drip irrigation tube (belt) is tailored slightly larger than the length of the plant. The drip irrigation tube (belt) is arranged along the plant line, then one end is connected with the by-pass.

6, the drip irrigation pipe (belt) is installed, open the valve and flush the pipeline, then close the valve. The drip irrigation pipe (belt) plug is placed at the end of the drip irrigation pipe (belt), and the branch pipe plug is placed at the end of the branch pipe.

7. The installation order of the whole drip irrigation system is: valve, filter, straight pass, branch pipe, perforation, bypass, drip irrigation pipe (belt), flushing pipe and plug.

  

Hangzhou Neetrue Irrigation Facilities Co.,Ltd
Add:West 57th Avenue, Riverside, 12C-02
Tel:+86-571-63137799
Fax:+86-571-63136565
Ph:+8613600541971
E-mail:summer@neetrue.com